Worn entrance steps covered with a matched resin finish on both treads and risers, no replacement needed.
Treads & Risers
Over Existing Concrete
Itemised Quote
What Goes Wrong
Why some resin step finishes fail within a season
Skipped Base Repair
Applying resin over cracked or spalled concrete without cutting back to sound material causes the finish to lift at the repair boundary within months.
Cut Back First
Damaged areas are cut back to sound concrete and repaired before any resin layer is applied, so the bond holds across the whole surface.
Wrong Riser Mix
Standard trowel-mix resin slumps on a vertical face before it cures, leaving an uneven or patchy finish on the riser that cannot be corrected after setting.
Vertical Resin System
A higher-viscosity vertical resin formulation is used on risers specifically, holding the aggregate in place on the vertical face while it cures.
Unmatched Aggregate
Choosing a colour blend from a screen or brochure often results in steps that clash with an adjacent driveway or path once both surfaces are seen together.
Physical Sample Match
Aggregate colour and stone size are selected from physical samples at survey stage, matched directly against the adjacent surface finish.
Ragged Edge Lines
Leaving edge and join finishing until after the resin begins to set produces unclean lines between tread and riser that are visible from the street.
Edge Finishing Before Set
Each step edge and join is finished before the surface sets, giving defined, clean lines between every tread and riser face.
Steps & Risers
How resin bound surfacing covers existing concrete steps on treads and risers
Matching worn entrance steps to a new resin driveway or path requires a different application method on the vertical riser face.
Older terraced and semi-detached homes in Huntingdon frequently have original concrete entrance steps that are worn, stained, or visually mismatched against an updated driveway. A resin bound finish can be applied directly over existing concrete steps where the base is sound, avoiding the cost and disruption of breaking out and replacing the structure. The concrete is prepared by cleaning and priming before any resin is applied, ensuring the finish bonds correctly.
Treads are trowelled flat using the same resin aggregate mix as the adjacent surface, giving a consistent colour and texture across the whole approach. Risers require a vertical resin system, a formulation with higher viscosity that holds the aggregate in place on the vertical face while it cures. Edge and join finishing on each step is carried out before the surface sets to give clean, defined lines between tread and riser.
Aggregate colour and stone size are selected from physical samples at survey stage, allowing the steps to be matched closely to an existing driveway or path finish. Where the concrete base has cracked or spalled, affected areas are cut back to sound material and repaired before the resin layer is applied. A surface that is not prepared to sound material will cause the resin finish to lift at the repair boundary within a short time.
Why Choose Us
Why choose us for resin bound steps in Huntingdon?
Taking your enquiry and scheduling a survey that quotes every stage separately and assesses the base before any price is agreed.
Itemised Quotation
Preparation, materials and finishing are quoted as separate line items, not one combined figure.
Site Assessment First
A site visit checks the existing concrete before any price is agreed or work is booked.
Matched to Your Approach
Aggregate samples are brought to survey so the step finish can be matched to an adjacent surface.
Surveyed First, Written Quote
We take your enquiry and schedule surveys across Huntingdon properties.
No Hidden Repair Costs
Base repair work is identified at survey and quoted separately before the job starts.
Can resin bound steps go over my existing concrete steps?
Yes, in most cases resin bound surfacing can be laid directly over sound concrete steps. The existing surface must be structurally solid, level and free from loose material or active cracking. Where the concrete is compromised, remedial work is needed first. A site assessment confirms whether your steps are suitable before any work begins.
Will resin steps be slippery when they get wet?
No. Resin bound aggregate has an open-textured surface that provides grip even when wet. The natural stone aggregate used in the mix creates friction underfoot, unlike smooth concrete or polished paving. This makes it a practical choice for entrance steps that see regular foot traffic in wet conditions.
How much does it cost to have resin steps fitted?
Guide prices run from £250-£500 (Single step or small repair) to £1,200-£2,500 (Larger stairway or stepped entrance). We quote excavation, sub-base, drainage and resin bound finish as separate lines so you can see exactly what each element costs.
Is resin a better choice than paving for steps?
Resin bound surfacing offers a seamless, joint-free finish that paving slabs cannot match on steps. Slabs can rock, crack at the edges, and collect moss in the joints over time. Resin bonds directly to the substrate, eliminates trip-hazard joints, and can be colour-matched to an existing driveway or path for a consistent look.
What are the downsides of resin steps?
Resin bound surfacing requires a sound, stable base, if the substrate beneath is cracked or shifting, the resin will reflect that movement over time. It also cannot be spot-repaired invisibly the way individual slabs can be swapped out. Colour can fade slightly in prolonged direct sunlight, though UV-stable resins reduce this significantly.
What finish will I get on the treads and risers?
Treads are finished with a textured, aggregate-exposed surface for grip. Risers are typically finished smooth or with a matching resin coat for a clean, consistent appearance. Aggregate colour and stone size can be chosen to suit your property, giving a uniform look across both treads and risers.
How much preparation is needed before resin steps can be fitted?
Preparation depends on the condition of the existing steps. Sound concrete may need only cleaning and priming. Damaged or unstable steps require repair or rebuilding before the resin layer is applied. Any loose material, oil contamination or standing water must be resolved first, as these will prevent the resin from bonding correctly.
Can resin steps cover hidden damage under the old steps?
No. Resin bound surfacing is a finish layer, not a structural repair. Hidden voids, crumbling concrete or subsidence beneath the steps must be fixed before the resin is applied. Laying resin over concealed damage will cause the surface to crack or delaminate, so a thorough inspection is carried out before work starts.
Which areas do you cover for Resin Bound Steps & Staircases?
We cover Resin Bound Steps & Staircases in and around Huntingdon, including Godmanchester, St Ives, Brampton, Alconbury Weald, Sawtry, Ramsey, Buckden, Kimbolton and Hemingford Grey. If your area isn’t listed, send us a quick message to check.
Get Worn Entrance Steps Finished Properly
Tell us about your steps and we’ll schedule a base assessment, aggregate samples on site, and a quote for every stage separately.