Skip to content

Patio Surfaces

Resin Bound Patios in Huntingdon

A permeable, stone-finish surface that drains freely and stays clean, no loose stones, no joint weeds.

  • Itemised Quote
  • Base Assessment First
  • SUDS Compliant
A modern house exterior featuring large bi-fold doors, extensive glazing, a brick extension, and a light grey resin-bound patio with outdoor furniture.

What Goes Wrong

Where resin bound patios fail, and how to avoid it

The finish is only as good as the decisions made before the mix goes down.

Unsuitable Base

Laying over a cracked or unstable base causes the resin layer to flex and delaminate within a season.

Base Assessment

The base is inspected for stability and drainage before an overlay is confirmed or levelling work is scoped.

Poor Mixing Method

Hand-stirring or paddle mixing leaves aggregate partially uncoated, producing a patchy, weak surface that sheds stones.

Forced-Action Mixer

A forced-action mixer coats every piece of aggregate fully in clear resin binder before the mix is trowelled flat.

Standing Water

Solid paving on clay-heavy ground sheds water to joints, causing pooling on flat garden areas after moderate rainfall.

Permeable Finish

Resin bound stone drains through the surface itself into the sub-base, removing standing water without extra channel drainage.

Jet Wash Damage

A rotary nozzle at high pressure dislodges aggregate and strips resin, leaving bare patches that worsen quickly.

Fan Nozzle Cleaning

A fan-nozzle pressure wash at moderate pressure cleans the surface thoroughly without disturbing the bound aggregate.

Scope of Work

What a resin bound patio installation covers

From base assessment through to the finished stone surface, each stage is quoted separately.

Overlay onto Existing Concrete

Resin bound layer applied directly over sound concrete.

Full Dig-Out & New Sub-Base

Complete excavation where the existing base is unsuitable.

Aggregate Colour Selection

Natural stone blends in multiple colours and sizes.

SUDS-Compliant Drainage

Permeable finish meets sustainable drainage requirements.

Patio Surface Options

Why resin bound works where paving slabs cause drainage problems

Clay-heavy ground across Cambridgeshire makes a permeable surface finish more practical than solid paving for most garden areas.

Request a Survey

Paving slabs shed water to the joints, which can pool or run towards the house on flat or semi-flat areas. A resin bound surface drains through the material itself, dispersing water into the sub-base below. On gardens with clay-heavy ground, this removes the standing water problem without the need for additional channel drainage in most cases. The base still needs to be assessed for stability and existing drainage before an overlay is confirmed.

Installation uses a forced-action mixer to coat each piece of aggregate fully in clear resin binder before the mix is trowelled flat by hand. The result is a smooth, even finish with no loose stones. Aggregate size typically ranges from 1 mm to 6 mm depending on the finish specified; smaller aggregate gives a tighter, finer surface. Cure time is usually 24 hours before light foot traffic.

Existing concrete or tarmac bases in Huntingdon gardens are often suitable for a resin bound overlay, avoiding the cost of a full dig-out. Where the base is uneven or has lifted, levelling work is carried out first. Cleaning is straightforward, a fan-nozzle pressure wash removes surface dirt without dislodging aggregate. Unlike paving slabs, there are no joints for moss or weeds to establish in.

Why Choose Us

Why choose us for resin bound patios in Huntingdon?

Local knowledge, clear pricing, and a process that starts with the base, not the finish.

Itemised Quotation

Base, drainage, and resin finish are quoted as separate lines so you see exactly what each stage costs.

Base-First Approach

No finish is specified until the existing surface has been assessed for stability and drainage suitability.

Cambridgeshire Clay Knowledge

Every survey accounts for how clay-heavy ground behaves and specifies sub-base depth and drainage accordingly.

Surveyed First, Written Quote

We take your enquiry and schedule resin bound surveys in the Huntingdon area.

No Surprise Costs

Levelling, edge restraints, and drainage are scoped before work starts, not added to the bill afterwards.

A completed resin driveways job at a house
A finished resin driveways project

The Process

From first enquiry to finished patio surface

Request a Survey

  1. 01

    Describe Your Area

    Tell us the size, what is down there now, and how it currently drains after rain.

  2. 02

    Base Survey & Quote

    The survey assesses the base, checks drainage falls, and leads to an itemised quote for every stage.

  3. 03

    Installation & Cure

    The resin bound surface is mixed, trowelled, and ready for light foot traffic within 24 hours of laying.

Pricing Estimates

Typical Resin Bound Patios Prices

JobTypical cost
Small resin-bound patio£2,000-£3,200
Typical 40m² resin-bound patio£4,400-£5,200
Resin-bound patio per m²£80-£130 per m²
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Resin bound patio questions answered

  • How much does a resin bound patio cost?

    Guide prices run from £2,000-£3,200 (Small resin-bound patio) to £4,400-£5,200 (Typical 40m² resin-bound patio). Every quote covers excavation, sub-base, drainage and resin finish as separate lines so you can see exactly where the money goes.

  • Is a resin bound patio cheaper than paving?

    Upfront, resin bound typically costs more per square metre than standard concrete slabs. Over time, the gap narrows because resin needs no re-pointing, resists weeds without chemicals, and rarely needs individual units replaced. For a like-for-like comparison, factor in maintenance costs over five to ten years.

  • Can I put a resin bound patio over my existing surface?

    Yes, if the existing surface is structurally sound, level, and bonded solid. Resin bound can be overlaid onto tarmac or concrete that shows no cracking, lifting, or movement. A surface with soft spots, cracks, or drainage problems must be repaired or replaced first, or the resin layer will fail above it.

  • Does my current base need to be in good condition for a resin bound patio?

    Yes. Resin bound is a surface layer, not a structural one, so it follows whatever is underneath it. Cracks, subsidence, or poor drainage in the base will telegraph through to the finished surface within months. A proper MOT Type 3 or SuDS-compliant sub-base is essential for a lasting result.

  • Will a resin bound patio drain properly in wet weather?

    Yes. Resin bound is a porous surface, water passes through the aggregate matrix and into the sub-base below rather than pooling on top. This makes it SUDS-compliant and suitable for areas where surface water runoff is a concern, provided the sub-base is designed to handle the flow rate.

  • What are the downsides of a resin bound patio?

    Resin bound costs more upfront than basic slabs and relies entirely on a sound sub-base, a poor base means the surface fails regardless of mix quality. Localised repairs can be visible if the aggregate batch differs. UV-stable resins resist fading, but cheaper mixes can yellow over time.

  • Will my resin bound patio last well?

    A well-prepared base and UV-stable resin mix typically delivers a surface that holds its colour and texture for well over a decade under normal domestic use. Longevity depends most on sub-base quality and drainage, both quoted as separate, itemised line items so nothing is cut to reduce cost.

  • Can I jet wash a resin bound patio?

    Yes, with care. A fan-tip nozzle at moderate pressure is safe and effective for removing algae and ingrained dirt. Avoid a concentrated jet held close to the surface, as high pressure can dislodge aggregate from the edges or any area where the bond has weakened over time.

  • Which areas do you cover for Resin Bound Patios?

    We cover Resin Bound Patios in and around Huntingdon, including Godmanchester, St Ives, Brampton, Alconbury Weald, Sawtry, Ramsey, Buckden, Kimbolton and Hemingford Grey. If your area isn’t listed, send us a quick message to check.

Tell Us About Your Patio Area

Describe the size, what is down there now, and how it drains. We’ll schedule a base assessment and quote every stage separately.

Request a Survey