Skip to content

Design & Specification

Custom Resin Paving Design in Huntingdon

A finish specified to your base, your drainage, and the materials already on your property.

  • Itemised Quote
  • Physical Samples
  • Base Check First
A newly installed resin-bound driveway with a decorative pattern leading to the front door of a modern brick house.

Common Pitfalls

Where resin paving designs go wrong, and how to avoid it

Colour Chosen Online

Screen colours shift under natural light, so an aggregate that looks right on a monitor can clash badly against real brickwork.

Samples at the Property

Physical aggregate samples are brought to the survey and held against the actual brickwork and boundary materials in daylight.

Overlay on Weak Base

A resin layer applied over a cracked or unstable surface will mirror every movement below, producing cracks and loose patches within a season.

Base Condition Check

A surface suitability check confirms whether an overlay will hold or whether the base needs levelling or taking up before any finish is laid.

Drainage Ignored

On flat Cambridgeshire plots, even a small level error sends water to the wrong place, pooling against a wall or across a path.

Gradient Mapped at Survey

Drainage falls are measured at survey stage, and channel positions are set in the specification before any resin work begins.

Borders Added Late

Edging fitted after the main resin layer is applied leaves a visible join line and a weaker bond at the border.

Edging Set First

Border edging is positioned and secured before the main resin layer goes down, giving a clean, consistent line across the full area.

Scope of Work

Design options covered for driveways, patios, and paths

Each element below is confirmed at survey stage and documented in the itemised quote before work starts.

UV-Stable Clear Resin Binder

Colour stays true after years of UV exposure.

Hand Trowelled Finish

Consistent surface around curves and borders.

SuDS-Compliant Surface

Permeable finish meets drainage regulations.

Design & Specification

How aggregate selection, borders, and drainage are specified for your property

The design process starts with what the base can support and what the property already looks like, not a catalogue of generic colour options.

Request a Survey

Huntingdon properties range from older brick-fronted homes to newer builds, and aggregate colour needs to sit alongside existing materials rather than clash with them. Physical samples are brought to the survey so colours and stone sizes can be assessed in natural light against the actual brickwork, boundary walls, or paving. UV-stable clear resin binder is used throughout, so the aggregate colour seen in the sample is the colour that remains after years of UV exposure.

Border detailing uses a contrasting aggregate blend or a different stone size to define the edge of a driveway, patio, or path. Edging is set before the main resin layer is applied, so the border line is clean and consistent. Drainage channels are positioned at survey stage based on the surface gradient and the direction water needs to travel, on Cambridgeshire’s flat terrain, even small level differences affect where water collects.

Base preparation is confirmed before any design decisions are finalised. A surface that looks suitable for an overlay may need additional levelling or drainage work once the gradient is measured. The design specification, aggregate blend, border layout, drainage positions, and edging detail, is documented in the quote so every element is agreed before work begins. Hand trowelling gives a consistent finish across the full surface area, including around curves and borders.

Why Choose Us

Why choose us for custom resin paving design in Huntingdon?

We take your enquiry and schedule a survey that documents every design decision before work starts.

Itemised Quote, Every Time

Excavation, sub-base, drainage, and resin finish are quoted as separate line items, not one combined number.

Specification Agreed Before Work Starts

Aggregate blend, border layout, and drainage positions are all documented in the quote before any work begins.

Surveyed First, Written Quote

We take your enquiry and schedule the survey, with a written quote for every stage before work begins.

Survey Covers the Full Picture

Base condition, drainage falls, and surface suitability are all checked at the same visit as the design consultation.

A completed resin driveways job at a house
A finished resin driveways project

The Process

From first enquiry to finished surface

Request a Survey

  1. 01

    Describe Your Area

    Tell us the size, what is down there now, and how it currently drains so we can schedule the right survey.

  2. 02

    Survey & Sample Review

    A site visit checks the base, measures drainage falls, and assesses physical aggregate samples against your property.

  3. 03

    Agree Specification & Start

    The full design spec and itemised quote are confirmed in writing before any excavation or resin work is scheduled.

Pricing Estimates

Typical Custom Resin Paving Design Prices

JobTypical cost
Simple custom design add-on£250-£750
Designed feature area£750-£2,000
Large bespoke paving layout£2,000-£5,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about custom resin paving design

  • Can a resin finish be made to match my house?

    Yes. Aggregate blends are mixed to order, so the stone colour and tone can be chosen to complement brick, render, or stonework. Bring a photo or sample to the survey so the right blend can be narrowed down from that reference.

  • What colour and aggregate options do I have?

    Resin bound systems use natural aggregates, quartz, flint, granite, and marble chippings, in sizes typically from 1mm to 6mm. Colours range from pale buff and cream through warm gold, slate grey, and near-black. Blends can be mixed to shift the overall tone warmer or cooler.

  • Can my existing base be used for a resin finish?

    Sometimes. A sound, well-drained concrete or tarmac base can accept a resin overlay without full excavation. If the existing surface is cracked, soft, or holds water, it needs breaking out and replacing first. A site assessment confirms which route applies to your drive. See resin overlay options

  • What base preparation will I need before the resin is laid?

    At minimum, the base must be structurally sound, level, and free-draining. Where the existing surface fails that test, the process involves excavation, a compacted MOT Type 3 sub-base, and a porous tarmac or concrete wearing course before the resin goes down. Each element is quoted as a separate line.

  • Will a resin finish work on a sloping drive?

    Yes. Resin bound aggregate is laid at a consistent depth across the slope, and the porous surface drains water through rather than letting it sheet off. Steeper gradients may need edge restraints or a channel drain at the base to manage runoff volume.

  • Will it cope with drainage if water already pools on my drive?

    Pooling usually means the existing base is not draining correctly, not a surface problem. Laying resin over a poorly draining base will not fix it. The sub-base and any drainage channels need to be addressed first; the resin finish then handles surface water through its permeable structure. More on permeable paving

  • How much will a custom resin paving design cost?

    Guide prices run from £250-£750 (Simple custom design add-on) to £2,000-£5,000 (Large bespoke paving layout). Excavation, sub-base, drainage, and the resin finish are quoted as separate line items so you can see exactly what drives the total.

  • Should I repair the old surface instead of having a new resin finish?

    Repair makes sense when damage is isolated, a few cracks or a small sunken area. If the surface has widespread cracking, drainage failure, or a failing sub-base, repair is a short-term fix. A new resin finish on a properly prepared base will outlast repeated patch repairs. Repair options explained

  • Which areas do you cover for Custom Resin Paving Design?

    We cover Custom Resin Paving Design in and around Huntingdon, including Godmanchester, St Ives, Brampton, Alconbury Weald, Sawtry, Ramsey, Buckden, Kimbolton and Hemingford Grey. If your area isn’t listed, send us a quick message to check.

Tell Us About Your Driveway

Describe the area, what is down there now, and how it drains. We’ll schedule a base assessment and quote every stage separately.

Request a Survey